S1B
ROV camera pod
The front of the pressure housing can take an optical window, with room inside for a board camera or other compatible modules.
- 01Retaining ring and acrylic window
- 02Face O-ring and window cap
- 03Lens plate and camera module
- 04Rear end cap and penetrators
The front cap takes an optical-grade window on a high-strength seat and O-ring that seal under external pressure. The compartment inside takes a lens mounting board for common 38 × 38 mm board cameras.
Penetrators and the vent plug sit at the rear. Window material, aperture and camera mounting can be changed to suit.
Specs & process
- Material
- 6061-T6 hard-anodized aluminum, optical-grade cast acrylic window, SUS 316 screws
- Process
- CNC, optical polishing and stress-relief annealing of the window
- Interior
- Lens mounting plate, standoffs, cable pass-through
- Adaptable
- Window material (acrylic, tempered glass, sapphire), aperture, camera interface
More in this field
S1 · Defense / Subsea & Marine / Industrial
4-inch ROV pressure housing
A cylindrical pressure housing for underwater robots and sensors, with flanges, end caps and penetrators designed as one system.
S3B · Defense / Security
Turret camera housing
Mounts on a ceiling or wall, with horizontal pan and vertical tilt.
D2 · Defense / Security / UAV
Modular payload pod
One pod body with interchangeable front covers for a thermal camera, LiDAR, gas sensor or other payloads.