S1B-L
ROV camera pod lighting kit
Clamps two underwater lights to the sides of the camera pod, adjustable in pitch and toe-in.
- 01Lights and light holders
- 02Light arms (pitch ±30°)
- 03Clamp ring and EPDM liner
- 04ROV camera pod
A clamp ring grips the outside of the housing; the light arms adjust in pitch and the light holders adjust toe-in. Mounting the lights outside and away from the lens axis reduces backscatter from particles in the water.
Clamp, arm and holder are each a single part used on both sides. Threaded holes get stainless inserts and anti-galvanic treatment for long immersion in seawater.
Specs & process
- Material
- 6061-T6 hard-anodized aluminum, EPDM liners, SUS 316 hardware
- Adjustment
- Pitch ±30°, toe-in 0–15°
- Corrosion
- Stainless thread inserts, anti-galvanic compound, isolation washers
- Adaptable
- Light diameter, light spacing, clamp diameter
More in this field
S1 · Defense / Subsea & Marine / Industrial
4-inch ROV pressure housing
A cylindrical pressure housing for underwater robots and sensors, with flanges, end caps and penetrators designed as one system.
D3 · UAV / Subsea & Marine / Industrial
Drone water sampler
Lowered into the water beneath a drone, it seals a 430 mL water sample at the chosen depth.
S1B · Defense / Security / Subsea & Marine
ROV camera pod
The front of the pressure housing can take an optical window, with room inside for a board camera or other compatible modules.